Limited Time Offer!
Selling Price -
Selling Price -
OPERATIONS:
Loader Arms Radial
Operating Weight 12990 lbs
Rated Operating Capacity @ 35% 4150 lbs
Rated Operating Capacity @ 50% 5929 lbs
Ground Pressure 4.6 psi
Engine Power 132 hp
Tipping Load 11858 lbs
Travel Speed, Maximum – 1st Speed 6 mph
Travel Speed, Maximum – 2nd Speed 10 mph
AUXILIARY HYDRAULIC:
Controls Intermittent via joystick button or continuous via console switch. High-flow is adjustable and loader/auxiliary sharing is adjustable via machine display
Couplers Push-to-connect quick couplers mounted on loader arms. Pressure relief valve on coupler block
Cooling System High efficiency side-by-side radiator and oil cooler
Pump Capacity Low 20 gpm
Pump Capacity High 50 gpm
System Pressure Standard Flow 3300 psi
System Pressure High Flow 4060 psi
ENGINE:
Type Diesel 4-cylinder, turbo charged
Model Cummins QSF3.8
Cooling System Temperature-controlled, variable speed and operator time-selectable, hydraulically-driven, auto-reversing fan and coolant/anti-freeze-filled radiator
Intake Air Cleaner Three-stage
Emission Controls Meets all U.S. EPA Tier 4 final standards
Standard Feature Auto Idle
Engine Power 132 hp
Torque Peak 360 ft-lb
ELECTRICAL SYSTEM:
Standard Features Attachment control kit, block heater
Wiring Pre-wired for all factory-available accessories
Outlets 1 – 12 V inside operator station
Charging System 120 Amp
Nominal Charge 12 V
Battery 950 CCA
DRIVE TRAIN:
Track Type General purpose track constructed of rubber compound with embedded co-polymer cords and all-purpose treads.
Drive System Two hydrostatic direct drive sprockets controlled by a single joystick
Track Drive Sprocket Elevated with low friction, replaceable sprocket rollers
Undercarriage suspension Two independent torsion axles per undercarriage
Roller Wheels 24 high-density polyurethane and rubber wheels per track.
Track Width 20 in
Length of Track on the Ground 71 in
Ground Contact Area 2840 in²
Roller Wheel Diameter Front & rear wheels 15 in
Roller Wheel Diameter Middle Wheel 10 in
OPERATOR STATION:
Seat Adjustable air ride contour vinyl seat with built-in operator presence switch, lap bar and 2 in. wide seat belt, operator manual pouch
Loader Control Right-hand electronic joystick controls loader lift, lower and tilt, plus intermittent control of auxiliary hydraulic. Loader speed is adjustable and selectable from ISO or H control pattern
Drive Control Left-hand electronic joystick controls machine speed and direction. Track speed is adjustable, includes a Creep Mode and is selectable from ISO or H control pattern
Engine Speed Hand-operated throttle and foot throttle
7-Inch Color Machine Display Engine RPM, engine oil pressure, hydraulic oil high temperature, engine coolant temperature, battery voltage, hour meter, fuel level, trip meter, engine diagnostics, system monitoring, fault logging, integrated rear view camera, password protection with user profiles, job clock, maintenance schedules, Def level, Adjustable controls, Adjustable hydraulic flows, winch (optional) control
OPS ISO 8084-Forestry, BC WCB G603 – Window guards for forestry, BC WCB G604 – Light duty screen guards for off highway, BC WCB G608 – Heavy duty roof structure, ISO 6683 – Seat belt anchors, CAL OSHA 1596 – Seat belt, ISO 11839 – Forestry thrown object guard
ROPS ISO 8082-Forestry
FOPS ISO 8083-Forestry
Illumination 2 – Adjustable forward-facing LED lights, 2 – Adjustable rear-facing LED lights, 1 – Interior light, 2 – LED side lights
Convenience 12 V power port
Standard Features Horn, backup alarm, cup holder, phone holder, behind seat storage, rear view mirror, lapbar, roof escape hatch, roof panel & rear cab windows. Adjustable joystick & arm rest positions, adjustable directional & air flow HVAC vents, radio with bluetooth & USB, frameless front door, attachment control kit, wiper/washer, easy-off door
SERVICE CAPACITY:
Fuel Tank 52 gal
Loader Arms Radial
Operating Weight 12990 lbs
Rated Operating Capacity @ 35% 4150 lbs
Rated Operating Capacity @ 50% 5929 lbs
Ground Pressure 4.6 psi
Engine Power 132 hp
Tipping Load 11858 lbs
Travel Speed, Maximum – 1st Speed 6 mph
Travel Speed, Maximum – 2nd Speed 10 mph
AUXILIARY HYDRAULIC:
Controls Intermittent via joystick button or continuous via console switch. High-flow is adjustable and loader/auxiliary sharing is adjustable via machine display
Couplers Push-to-connect quick couplers mounted on loader arms. Pressure relief valve on coupler block
Cooling System High efficiency side-by-side radiator and oil cooler
Pump Capacity Low 20 gpm
Pump Capacity High 50 gpm
System Pressure Standard Flow 3300 psi
System Pressure High Flow 4060 psi
ENGINE:
Type Diesel 4-cylinder, turbo charged
Model Cummins QSF3.8
Cooling System Temperature-controlled, variable speed and operator time-selectable, hydraulically-driven, auto-reversing fan and coolant/anti-freeze-filled radiator
Intake Air Cleaner Three-stage
Emission Controls Meets all U.S. EPA Tier 4 final standards
Standard Feature Auto Idle
Engine Power 132 hp
Torque Peak 360 ft-lb
ELECTRICAL SYSTEM:
Standard Features Attachment control kit, block heater
Wiring Pre-wired for all factory-available accessories
Outlets 1 – 12 V inside operator station
Charging System 120 Amp
Nominal Charge 12 V
Battery 950 CCA
DRIVE TRAIN:
Track Type General purpose track constructed of rubber compound with embedded co-polymer cords and all-purpose treads.
Drive System Two hydrostatic direct drive sprockets controlled by a single joystick
Track Drive Sprocket Elevated with low friction, replaceable sprocket rollers
Undercarriage suspension Two independent torsion axles per undercarriage
Roller Wheels 24 high-density polyurethane and rubber wheels per track.
Track Width 20 in
Length of Track on the Ground 71 in
Ground Contact Area 2840 in²
Roller Wheel Diameter Front & rear wheels 15 in
Roller Wheel Diameter Middle Wheel 10 in
OPERATOR STATION:
Seat Adjustable air ride contour vinyl seat with built-in operator presence switch, lap bar and 2 in. wide seat belt, operator manual pouch
Loader Control Right-hand electronic joystick controls loader lift, lower and tilt, plus intermittent control of auxiliary hydraulic. Loader speed is adjustable and selectable from ISO or H control pattern
Drive Control Left-hand electronic joystick controls machine speed and direction. Track speed is adjustable, includes a Creep Mode and is selectable from ISO or H control pattern
Engine Speed Hand-operated throttle and foot throttle
7-Inch Color Machine Display Engine RPM, engine oil pressure, hydraulic oil high temperature, engine coolant temperature, battery voltage, hour meter, fuel level, trip meter, engine diagnostics, system monitoring, fault logging, integrated rear view camera, password protection with user profiles, job clock, maintenance schedules, Def level, Adjustable controls, Adjustable hydraulic flows, winch (optional) control
OPS ISO 8084-Forestry, BC WCB G603 – Window guards for forestry, BC WCB G604 – Light duty screen guards for off highway, BC WCB G608 – Heavy duty roof structure, ISO 6683 – Seat belt anchors, CAL OSHA 1596 – Seat belt, ISO 11839 – Forestry thrown object guard
ROPS ISO 8082-Forestry
FOPS ISO 8083-Forestry
Illumination 2 – Adjustable forward-facing LED lights, 2 – Adjustable rear-facing LED lights, 1 – Interior light, 2 – LED side lights
Convenience 12 V power port
Standard Features Horn, backup alarm, cup holder, phone holder, behind seat storage, rear view mirror, lapbar, roof escape hatch, roof panel & rear cab windows. Adjustable joystick & arm rest positions, adjustable directional & air flow HVAC vents, radio with bluetooth & USB, frameless front door, attachment control kit, wiper/washer, easy-off door
SERVICE CAPACITY:
Fuel Tank 52 gal
- Union City TN
- New
- Pre-Order
- 2025
- ASV
- RT-135 Forestry
- Available